BS Standard Forklift Battery
Tubular Positive Plates + Negative plain plates
55Ah
Product Catalogs --- BS standard
Positive Tubular
| Model | 50Ah | 55Ah | 60Ah | 70Ah | 80Ah | 90Ah | 100Ah | 75Ah |
| Size(H1) | 336mm | 336mm | 383mm | 405mm | 471mm | 556mm | 556mm | 443mm |
| Size(H2) | 299mm | 299mm | 346mm | 368mm | 434mm | 519mm | 519mm | 408mm |
Product Application
1. Electric forklift truck
2. Electric transporting cars
3. Electric stacker
4. Electric pallet truck
5. Tunnel/metro locomotives
6. Electric golf cart
7. Road vehicles and other deep cycle DC power supply equipment
Product Features
1. When the average temperature of the electrolyte is 30℃ , the
electrical features are showed in annex 1. If the average
temperature is not 30℃ , the capacity will be corrected according
to the following formula. C30: the capacity corrected to 30 ℃ , AH;
Ct: the measured capacity at the average temperature t℃ , AH; T:
the average temperature during discharge, ℃ 0.006: the temperature
factor. The aforesaid formula is just accepted when the average
temperature of the electrolyte is (15-40)℃ .
2. The circulatory endurance: tested according to
GB/T7403.1-1996(Traction lead-acid battery) national standard, the
circular endurance is not less than 750 times.
3. The cells should not be stored for more than two years after
ex-work at the temperature of 5-40℃ and the relative humidity
should be good, otherwise the rated capacity and the service life
will be relatively reduced.
Service Manual
1.The lead-acid traction battery(short for: cell) are developed and
produced according to The people’s republic of China standard GB/T
7403.1—1996(The lead-acid traction battery), it primarily supplies
direct current(DC) power to electric lift trucks, tractors, pallet
trucks and mine locomotive, etc. The lead-acid battery belongs to
the second battery, when it is charged, the electricity power is
transformed into the chemical power, and stored in the cell, when
it is discharged, the chemical power is transformed into
electricity power supplying to the equipments. Every time you use
it(discharge), the active materials can recover by charging.
Charging and discharging can repeat many times, use circularly.
2. Each cell contains tubular positive plates, pasted negative
plates, electrolyte, micro-porous rubber separators, jar, cover,
terminal and vent cap. The cover and jar are heat sealed or sealed
with sealing compound. 3. The cells are connected in series by
bolts or welded according to the consumers’ requirements.
